Thread
:
Project RB-Z
View Single Post
03-04-2012, 12:56 AM
#
98
(
permalink
)
docaam
A True Z Fanatic
Join Date: Nov 2009
Location: Dubai
Posts: 2,532
Drives: Z34/240z/Hakosuka
Rep Power:
29
Had time on Thursday to get the wheels installed on the car with tires to find all rubbing or any other issues. Rear ones came out a bit more stretched then front.
Rear on the Left and front on the right
Rear with center cap
Measured the lip for rear came around 6.9"
Side by side
Got these Kics R40 Neochrome long open end lugs
Test fitment,
Front looks perfect except the rear problem, might go with 3mm/5mm spacer or trim the bumper steer spacer
Rear ones, car is still on the jack at the rear for camber arms fitting, but placement is ok and poke is slightly more, might come out a bit from fender flares.
Front brakes and rear brake are done and so was the brake lining, will be installing 1"brake booster. Only problem in the rear was to attached the ebrake/handbrake the clip pattern is different so trying to find a way around it.
Front camber arms and TC control rods installed
Installed my 19" Row Sterab oil cooler bought from GTM, have to work on some clean brackets.
__________________
Old 370Z SOLD but not forgotten
370Z 40th,
G37s,
S30 RBZ
,
Hakosuka Skyline
docaam
View Public Profile
Send a private message to docaam
Find More Posts by docaam