Thread: [For Sale] Oil cooler & Sandwich plate
View Single Post
Old 03-03-2012, 01:16 AM   #3 (permalink)
threeseventy
Track Member
 
threeseventy's Avatar
 
Join Date: Mar 2011
Location: Huntington Beach, CA
Posts: 600
Drives: Opinion
Rep Power: 15
threeseventy is on a distinguished road
Default

Quote:
Originally Posted by bigrob126 View Post
For sale is a TRU-cool oil cooler and a 180 degree Mocal sandwich plate. Please note this is NOT a complete setup!! You will need 10' of hose and 4-90 degree fittings. What I am selling would run $150 from the dealer plus shipping.
These are the same cooler and sandwich plate used in Modshack's DIY post. Both were on my car for about 3 days. It was taking too long for my oil to heat up, so I reverted back to stock. The sandwich plate has the 2 fittings already in place, and the cooler has STRAIGHT fittings, in place of the 90 degree elbows MS used. When the elbows snug up, whatever direction they are facing, is the direction you will be running your lines. I preferred to use straight adapters with the 90 degree fittings instead, to get the exact direction of the hoses. All connections were leak free! Locktite was used at the cooler. Asking $100 plus $15 shipping.

You can PM me or email me at:

bigrs1@yahoo.com
I have the hoses and 3 out of 4 Aeroquip fittings for this, $40 shipped- all you need for a full kit is one more fitting and, thread tape, a quart of oil, and some DIY Balls or a good shop with 1.5 hours to spare... GLWS OP!
threeseventy is offline   Reply With Quote