Nissan 370Z Forum - View Single Post - suitable replacement for Polk mm components?

Pat C. · 02-12-2012, 03:45 PM

Send me a PM. I just completed my regulator door panel removal and reinstall a few weeks ago. Used about 5 sheets of Dynamat to deaden the inner exterior skins. Just able to hook the power back up this past week to where I can check for proper window operation and such, and can say that all is 100%.
Yes, you have to drill out the 2 rivets that attach the regulator panel to the window tracks. Somewhat tricky to re-rivet, but not really brain surgery...Might be close depending on your expertise with working on "things." Do think this is an option to just laying the sheets over the panel.
Pat

02-12-2012, 03:45 PM	#7 (permalink)
Pat C. Base Member Join Date: Aug 2011 Location: Eagle River, Alaska Posts: 70 Drives: 10' 370Z coupe M6 Rep Power: 14	RonRizz Send me a PM. I just completed my regulator door panel removal and reinstall a few weeks ago. Used about 5 sheets of Dynamat to deaden the inner exterior skins. Just able to hook the power back up this past week to where I can check for proper window operation and such, and can say that all is 100%. Yes, you have to drill out the 2 rivets that attach the regulator panel to the window tracks. Somewhat tricky to re-rivet, but not really brain surgery...Might be close depending on your expertise with working on "things." Do think this is an option to just laying the sheets over the panel. Pat