Quote:
Originally Posted by gmr19
I installed on rear only. Stillen's website says you cannot install H&R DRM (type 2) spacers at all up front with OEM wheels. I know there is a bolt on the hub to prevent rear wheels from being accidentally installed on the front. Not sure if this is the cause, but you can remove that bolt. Or maybe the OEM front wheels do not have any kind of recess for the spacer stud to extend into.
reference: STILLEN : H&R TRAK+ Wheel Spacers |
I removed the bolt up front as it does nothing, and installed the 20mm Type 2 Spacers. This worked fine. I didnt buy those type of spacers though. I got the Kics project brand without the center ring.