Quote:
Originally Posted by gmr19
This is not accurate. I installed 15mm H&R with the built-in studs and no issues with them clearing the OEM 19s. But I believe you cannot go narrower than a 15mm spacer if not replacing the studs outright with longer ones since the nuts holding the spacer on will interfere with the wheel.
|
Do you have these 15mm spacers on the front or just the rear? I would go 20mm on the rear but I wonder if the amount of stud that protrudes would be the same on the front as the rear. I would like to do 15mm on the front if possible.