Quote:
Originally Posted by spearfish25
My concern is that those side 'pockets' where the Ingens sit don't have as much airflow access as the Stillen kit gets right in front of the radiator.
I took the front fascia off to replace the horns and those lateral areas seem very isolated from good airflow. This just puts the intake filters in their own isolated little pockets once the fascia is back on. I'd be surprised if the gains for the Ingen come anywhere close to the Stillen GenIII.
|
They seem that way, but it's not like they are sealed off or anything. A fair amount of air that enters through the front grille makes it's way to those pockets.
If it's really a concern, you could always remove the "dividers" and completely open that area up, but then I'd worry about getting the filters wet in rain driving. Your best bet would probably be to cut holes in the dividers and use Steve's (Modshack) technique to divert some more air into that area.