Originally Posted by Jappbox

Yes the wheels fit good, you have to order at least a 20mm or more spacer for the stock 19"s to clear. there is some offset in the wheel to allow some of your original studs to go into, but you need at least a 20mm to do so. The spacers I bought had instructions but from Japan, I only could decode that the nuts with the kit need to be tq' to 90NM, so I impacted them on and then checked with TQ Wrench. Make sure you use a TQ wrench because my inpact didnt do the trick and the spacers are Aluminum, so a TQ wrench is recomended.