Thread: How do you remove the sharkfin antenna?
View Single Post
Old 02-06-2012, 02:21 PM   #3 (permalink)
370ZilverZ
A True Z Fanatic
 
370ZilverZ's Avatar
 
Join Date: Dec 2011
Location: DFW, TX
Age: 67
Posts: 2,321
Drives: '11 BMW Z4
Rep Power: 19
370ZilverZ has much to be proud of370ZilverZ has much to be proud of370ZilverZ has much to be proud of370ZilverZ has much to be proud of370ZilverZ has much to be proud of370ZilverZ has much to be proud of370ZilverZ has much to be proud of370ZilverZ has much to be proud of370ZilverZ has much to be proud of370ZilverZ has much to be proud of
Default
From the Assy. Manual

REMOVAL
1. Remove rear pillar finisher (LH/RH).
2. Pull down headlining (rear side) and obtain space for work between vehicle and headlining.
3. Disconnect satellite radio antenna connector.
4. Remove satellite radio antenna mounting nut, then remove satellite radio antenna from roof panel.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Never bend headlining when pull down headlining (rear side).
• When satellite radio antenna mounting nut tightening torque is loose, be careful about tightening torque. Antenna sensitivity becomes poor, and when it is excessive, roof panel may become deformed.
__________________
BMW Z4
370ZilverZ is offline   Reply With Quote