View Single Post
Old 02-03-2012, 08:14 PM   #13 (permalink)
gabo
Enthusiast Member
 
Join Date: Jul 2011
Location: port coquitlam, BC
Posts: 390
Drives: 2010 grey 370z M6
Rep Power: 14
gabo is on a distinguished road
Default

Quote:
Originally Posted by tjlazer View Post
You can manually reset the SES

Nissan 370Z Reset ECU

Read the process a few times before you try to do this its ALL ABOUT TIMING:

1) With the key in your pocket/car, push the Engine Start button TWICE (so the car is fully on, but not started)
2) Within three seconds of the car "ON" (again NOT started), Floor (all the way down) and Release the gas pedal fully 5 times within 5 seconds.
Do not do this too fast.. 1..2..3..4..5
3) Wait 7 seconds then floor the gas pedal and hold for 10 seconds. After that 10 seconds the Check Engine Light will start to blink slowly.
4) Release the pedal and floor it down once again and hold for 10 seconds. After these 10 seconds the check engine light will disappear then

begin to flash much more rapidly. After you have done the following turn the car off and then back on. The ECU is now reset!!

I do it every ~400 miles or so with my HFC's
so when you do this steps the engine light should be gone? and will it come back again after driving for a while? thanks for the help.
gabo is offline   Reply With Quote