Quote:
Originally Posted by Baer383
On the long boot there is a metal strap cut it and slide the boot back then you will see a washer that is bent over as a lock (sort of)after bending it out of the way then use a big wrench to unscrew the inner tie rod it comes off righty tighty lefty loosey.
|
Good description Baer.
Make sure to use medium strength thread sealant on the replacement if it isn't pre-applied. Torque to approximately 68 lb/ft.
You'll need a new wire for the boot, the instructions for re-installing the boot are described on page ST-22, 23.