Quote:
Originally Posted by 90 ST
But they will...the Bose system is a 6x9, depth, once you make the spacer should be good, and i know there is more than a 1/4 more around a 6.5, so 7" should be good, the only real problem would be the 4.5" in the dash, you will most likely have to copy the stock grill and make your own plates for them.
Or what about doing the 631 set, with the 3.7" mid?
|
The 631 would be fine also. I haven't looked at the depth on that. Perhaps that would remedy the issue BIG noted with the plastic limiting depth up there.
I will check out the Bit one and MS8, but honestly I don't want an overly complicated system. Well maybe that is the wrong way to put it. I don't want access to too much to tweak... the more stuff I have to tweak... well, I will be in my car 24/7 jacking with things lol.
Perhaps I should just stick with a 2-way and get the Legatia pro 6.5 set. Cutting metal, new grilles for the dash, extending door panels, etc., is not what I want. Unless, the 6.5 just don't give me what I want.
One of the installers has the 641 installed in their car and... it sounds very nice.
I really appreciate everyone's advice though. Keep the ideas coming if you have them.
