Nissan 370Z Forum - View Single Post

haitech · 12-08-2011, 05:48 AM

Ok I'm getting the hang of the audio and I want to know what would be good in running the jl 10w6v2 d4?

I believe the rms of the sub is 600w and a dual voice coil 4 ohm. So a good amp to run I read is a mono amp because the multichannel amps can't be bridged to support the sub. Am I on the right track?

I read people run the jl 500/1 amp with this sub. If ran in parallel that would yield 2 ohms right?

If the Hifonics BXi1210D, which is a 1200w rms mono amp, is run in series that would be alright?

Would the J2 500.1 also be a good choice? Or suggestions would be helpful also.

Help guide me in the right direction.

12-08-2011, 05:48 AM	#1 (permalink)
haitech Track Member Join Date: Sep 2011 Location: Austin/Dallas Posts: 922 Drives: 11' 370z Magnetic M6 Rep Power: 15	Amp for jl 10w6v2 d4 Ok I'm getting the hang of the audio and I want to know what would be good in running the jl 10w6v2 d4? I believe the rms of the sub is 600w and a dual voice coil 4 ohm. So a good amp to run I read is a mono amp because the multichannel amps can't be bridged to support the sub. Am I on the right track? I read people run the jl 500/1 amp with this sub. If ran in parallel that would yield 2 ohms right? If the Hifonics BXi1210D, which is a 1200w rms mono amp, is run in series that would be alright? Would the J2 500.1 also be a good choice? Or suggestions would be helpful also. Help guide me in the right direction. Last edited by haitech; 12-08-2011 at 05:54 AM.