Nissan 370Z Forum - View Single Post - Have knowledge in Alignment/Camber adjustment?

TMAN1985 · 11-16-2011, 04:14 PM

I got my car lowered on Swift Spec R Springs. I had my alignment right after with stock camber arms. My camber was -2.3 in the front and -3.3 in the rear. The max to be in spec is -2.2 all around and -0.5 is stock (according to the place that I went). I ordered Camber arms for the rear and installed them. It was apparently suppose to go 2 degrees either way from stock camber meaning my rear should be at -1.3? Anyways, when they did the alignment they said they couldnt adjust the camber much because the toe would be way off. So they made it go from -3.3 to -2.7. Does this sound right...were any of you able to go with less negative camber?

11-16-2011, 04:14 PM	#1 (permalink)
TMAN1985 Enthusiast Member Join Date: Aug 2011 Location: Fort Myers, FL Posts: 296 Drives: 09 Touring/Sport/Nav Rep Power: 14	Have knowledge in Alignment/Camber adjustment? I got my car lowered on Swift Spec R Springs. I had my alignment right after with stock camber arms. My camber was -2.3 in the front and -3.3 in the rear. The max to be in spec is -2.2 all around and -0.5 is stock (according to the place that I went). I ordered Camber arms for the rear and installed them. It was apparently suppose to go 2 degrees either way from stock camber meaning my rear should be at -1.3? Anyways, when they did the alignment they said they couldnt adjust the camber much because the toe would be way off. So they made it go from -3.3 to -2.7. Does this sound right...were any of you able to go with less negative camber? __________________ HKS HI-POWER EXHAUST\|Stillen Gen 3 Intake\|Berk HFC\|UpRev tune\|Swift SPEC-R Springs\|H&R Spacers\|EVO-R Lip\|EVO-R High Wing\|SPC Front/Rear Camber Arms\|Hardwired Escort 9500ix