Quote:
Originally Posted by DufDaddy
How is everyone else getting past the Dip / tape issue? Taping out areas hasn't really worked out for me. The heavy coats seal across the tape and then pull the Dip off. What I did for the rims above was to tape everything like normal then used thin electrical tape along the "lines" I wanted then after every coat I removed the electrical tape while Dip was still wet. It worked real well, got sharp lines but it was tedious to reapply the tape after each coat dried.
Any other ideas? I actually did a lil R&D and tried spraying stuff on the painters tape and Pledge worked the best but the feasibility of not getting Pledge on the stuff you want Dipped seems dim.
|
Its tough to remove your masking after applying the Plasti Dip. I think its best to let it cure for a few days before removal. I just removed the masking tape slowly, I used painters tape to be specific. I also used a razor to help cut the Plasti Dip when it was sticking to the tape. Looks like yours came out pretty good, no?