The pictures are pretty much self explanatory. Disconnect the battery, remote both seats, first remove 2 bolts on the front or rear and work the other side by sliding the seat. Tilt the seat backwards so you can see the bottom and disconnect the harness. There will be 3 connectors and 1 spare. Off the three connectors you will have 1) seat belt switch 2) air bag power 3) weight sensor and 4) empty harness for the power seats/heated seats to plug into.
Install the seats, plug all 4 harnesses, bolt seat down. Plug in battery again and enjoy your power seats.
Only thing I didn't finish is the heated switches. I assume all I need are the switches and it is plug and play as well since there is 12Volt constant under the cupholder there are 2 plugs in the back for the heated switches.
As soon as I get them, I will post again with my findings. FYI my car is #1 2012 built! and has the harnesses.
If you need to know if your base/sport has the harness just look under the seat and you will see 1 connector taped up onto the yellow harness and seat belt harness. You can get 12 volts off this also if you need it for something else but it is constant on!
I am now looking for black leather door inserts!!! HELP!
Last edited by martin82; 11-11-2011 at 11:21 PM.
|