Nissan 370Z Forum - View Single Post

zfive · 10-28-2011, 08:18 PM

The same thing happened to mine when I installed my HU. I removed the silver plastic ring that goes around the shift knob (per the HU install instructions I found on the forum; btw, this ring didn't need to be removed for an HU install), and when I put it back on, it didn't go on properly. It was a little crooked which prevented the s-button from getting pressed all the way in. So, check that silver ring -- remove it and put it back on again. The s-button should click when you press it all the way down. If it doesn't, it probably means it's not getting pressed all the way in.

10-28-2011, 08:18 PM	#16 (permalink)
zfive Base Member Join Date: Jun 2011 Location: Morgan Hill, CA Posts: 32 Drives: 11 370Z Nismo Rep Power: 14	Check the silver ring around the shift knob The same thing happened to mine when I installed my HU. I removed the silver plastic ring that goes around the shift knob (per the HU install instructions I found on the forum; btw, this ring didn't need to be removed for an HU install), and when I put it back on, it didn't go on properly. It was a little crooked which prevented the s-button from getting pressed all the way in. So, check that silver ring -- remove it and put it back on again. The s-button should click when you press it all the way down. If it doesn't, it probably means it's not getting pressed all the way in.