Nissan 370Z Forum - View Single Post

Motordyne · 10-21-2011, 04:50 PM

The hose does not have to go over the plenum or around the TB.

They are assembled here with a zip tie on the hose to properly route the hose under the plenum. Its there to eliminate any confusion on how or where to route the hose.

NOTE: I can see from the picture the zip tie was removed and the hose is not routed under the plenum.

And yes, the small plastic piece you referred to in #2 is left unattached. It just moves to the side upon installation. Its not a problem.

10-21-2011, 04:50 PM	#2 (permalink)
Motordyne Enthusiast Member Join Date: Nov 2008 Location: Los Angeles Posts: 384 Drives: Z Rep Power: 17	The hose does not have to go over the plenum or around the TB. They are assembled here with a zip tie on the hose to properly route the hose under the plenum. Its there to eliminate any confusion on how or where to route the hose. NOTE: I can see from the picture the zip tie was removed and the hose is not routed under the plenum. And yes, the small plastic piece you referred to in #2 is left unattached. It just moves to the side upon installation. Its not a problem. Last edited by Motordyne; 10-21-2011 at 04:54 PM.