All,
I posted this on ZClub (Australian forums of the 370Z) and thought I'd post in here if someone was considering a similar setup.
I started with a stock 2010 370Z Roadster and added the Stillen G3 Intakes + ERZ HFC + GT Haus CBE.
I am yet to get the car tuned but am extremely happy with the approx 10% gains achieved.
Quite happy with parts from all the vendors but just a little concern over the loudness of the GT Haus CBE - I got it knowing it was loud but did not expect it to be anywhere near as loud as what it really is. Its almost as loud as the F1's
The regulation here in Australia is 86dB and the GT Haus measured in at about 106dB.
I love the sound of it however it can be seen as nuisance by some and am unsure how long will I get away with it before getting a EPA notice.
However I do feel that it will calm down a bit after 4-5 fuel tanks of carbon...I'll post an update at that time..
It literally scares the **** out of people if I were to put my foot down!
Anyway here it goes...
Car ready with its goodies..
Ready for Dyno @ Stock..
Dyno Results @ Stock..
Stock Intakes..ready to come off
Stock HFC + CBE..ready to come off
Famous Demon bolt stripped..
Stock Vs Aftermarket..
ERZ HFC + fouler...
GT Haus CBE...
HFC + CBE Fitted..
Stillen G3 - fitted..
All put back together..
Post Parts install Dyno
Stock Dyno Vs ERZ HFC + Stillen G3 + GT Hause CBE Dyno (NO TUNING YET)
Can't wait to get it tuned. Have clocked over 400KMs since installed! NO CEL yet..