Nissan 370Z Forum - View Single Post - Who here is running a small spacer? <7mm?

kenchan · 10-02-2011, 05:46 PM

for the front you need the stud-replacement type. get spacers with hubcentric lip (ie: Eibach).

for the rear you can use the bolt-on type spacer. again make sure you got the hubcentric type. I recommend Kic's with the optional centering rings. also have had success with Eibach bolt-on type as well. H&R ive had good luck too but some folks were finding their centering ring lip shearing off.

10-02-2011, 05:46 PM	#8 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	for the front you need the stud-replacement type. get spacers with hubcentric lip (ie: Eibach). for the rear you can use the bolt-on type spacer. again make sure you got the hubcentric type. I recommend Kic's with the optional centering rings. also have had success with Eibach bolt-on type as well. H&R ive had good luck too but some folks were finding their centering ring lip shearing off.