Those pictures are a big help man, thanks. So what would you do in terms of setting everything up? Is the approach I mentioned above reasonable? That being:
1. Place / set the crossover in the kick panel.
2. Take out door panel, remove stock speaker, splice cable - extend cable as needed.
3. Pray to god I can get the molex adapters off - open space for cable.
4. If I do, route source cable from the door to the crossover, and route the door speaker cable from the crossover to the door speaker.
5. Tweeter should be easy enough (I hope) once the crossover is in place and with the appropiate source.
Sounds good?
|