Nissan 370Z Forum - View Single Post - DIY: Oil Cooler (scratch built install, lottsa pics).....>.

ChrisSlicks · 08-25-2011, 07:24 AM

The Mocal sandwich plate uses BSP fittings, someone may have attempted to use an NPT fitting which will work but will get hung up halfway in. If it isn't leaking I would be tempted to leave it.

The fitting you likely need is 1/2" BSP to -10 AN. There is also a high-flow version of the sandwich plate that uses 22mm fittings but I haven't seen anyone use that one yet. Of course this is assuming that it is a Mocal.

08-25-2011, 07:24 AM	#248 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	The Mocal sandwich plate uses BSP fittings, someone may have attempted to use an NPT fitting which will work but will get hung up halfway in. If it isn't leaking I would be tempted to leave it. The fitting you likely need is 1/2" BSP to -10 AN. There is also a high-flow version of the sandwich plate that uses 22mm fittings but I haven't seen anyone use that one yet. Of course this is assuming that it is a Mocal. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms