Nissan 370Z Forum - View Single Post

Rsdntevl · 08-24-2011, 03:01 AM

So I just put on the new Vis hood and it looks pretty good overall, except for a small gap about 0.5 cm bridging the from bumper. The hood also didn't come with the holes for the two latches connecting to the car, but I was able to drill 2 holes of the correct size and added the latches without a problem. The one thing I was concerned with was the lack of holes for the wind shield fluid tube clips and the sprayer nozzle. I disconnected the tubes instead and will figure it out later on.

There is a small gap here:

The fitment issue was slightly upsetting, however the price of the hood made up for it.

08-24-2011, 03:01 AM	#1 (permalink)
Rsdntevl Base Member Join Date: Jan 2011 Location: Los Angeles Posts: 157 Drives: 2010-370z-Grey-6MT Rep Power: 14	Vis Racing CF OEM hood installed pics So I just put on the new Vis hood and it looks pretty good overall, except for a small gap about 0.5 cm bridging the from bumper. The hood also didn't come with the holes for the two latches connecting to the car, but I was able to drill 2 holes of the correct size and added the latches without a problem. The one thing I was concerned with was the lack of holes for the wind shield fluid tube clips and the sprayer nozzle. I disconnected the tubes instead and will figure it out later on. There is a small gap here: The fitment issue was slightly upsetting, however the price of the hood made up for it. Last edited by Rsdntevl; 08-24-2011 at 03:08 AM.