No glue needed.It comes with sticky back side.The 3M Film is pretty flexible,just make sure it is warm when installing it.Or heat it up with the hair dryer.No issues with bubbles,just do the flat parts first,squeegee it out with your fingers or soft piece of plastic,and than stretch the film around the bends.Cut off excess film with the blade,and you are done.
The hardest part to do were the mirrors.Used two pieces to cover each mirror.
It does not tear,nor break.It is CF after all.
After you are done.Let the car bake in the sun,or use hair dryer on the CF Film.
|