Nissan 370Z Forum - View Single Post

RedBullRR · 08-08-2011, 07:09 AM

I could not find a DIY for this mod, and went ahead and started the install. I put the rear camber arms in with no problems. However when installing the Toe Bolt and enlarging the hole I made the hole larger for the toe bolt that goes were the camber arm goes and not the spring bucket.

Below is a DIY for the 350Z that states this goes were the spring bucket goes.
http://www.batit.com/forumpics/spctoeboltinstall.pdf

My questions... Obv I have to remove those bolts now and place the stock ones back on. Did I **** up my cars toe by making those holes bigger?

08-08-2011, 07:09 AM	#22 (permalink)
RedBullRR Enthusiast Member Join Date: Oct 2010 Location: Suffolk Posts: 336 Drives: 2010 370Z Red Rep Power: 15	I could not find a DIY for this mod, and went ahead and started the install. I put the rear camber arms in with no problems. However when installing the Toe Bolt and enlarging the hole I made the hole larger for the toe bolt that goes were the camber arm goes and not the spring bucket. Below is a DIY for the 350Z that states this goes were the spring bucket goes. http://www.batit.com/forumpics/spctoeboltinstall.pdf My questions... Obv I have to remove those bolts now and place the stock ones back on. Did I **** up my cars toe by making those holes bigger? __________________ 2010 Solid Red Z: Mods: Stillen G3 Intakes \| BC Coilovers \| H&R 20/25 Spacers \| Stillen Splitter \| Stillen LW Pullie TBI \| Red GTR Start \| LED Interior \| Kenwood Double Din