You will have to use a suction gun to put the fluids in - there isn't any room to just pour it. If I remember correctly about 3.2 qts for the MT and 1.8 qts. for the diff. Make sure the car is level and take the filler plug off first to make sure you can get it off. Just keep pumping the fluid in until it starts to escape out the filler hole. You can buy the crush washers at Nissan but they charge too much. I went to a Jiffy Lube and bought a handful for $5.00 because I wasn't sure of the size. All of them were too small and ended up re-using the old ones and watched for leaks for a couple of days.
|