FYI - The "MOC-SP1FT Mocal Sandwich Plate- 20mm Thread" has a 1" nut and requires a deep socket (depth is 1 1/8" or greater) but a Outer diameter of 1.41" is too large (i.e. thick walled impact socket), but 1.33" OD will work. Not sure the maximum OD other than it's between those values.
You can fit an adjustable wrench in but it's easier to install with a socket.
Pulled it out here recently to swap out the Aeroquip socketless hose after a friends setup blew off the line and mine was uncomfortably pulling away (~2mm gap). BTW he had plenty of slack and had daily driven the car for a month, but it didn't pop off till a track day.
Last edited by NismoZ_840; 08-17-2011 at 07:59 PM.
|