I can't get a meter on the harnesses with them plugged in, I don't want to strip any wires yet
Here's the info had from probing the harnesses, ignition on, MAF's unplugged
Pass side
Pin 2 (yellow) - 12v
Pin 3 (green) - Signal from sensor to dme
Pin 4 (teal) - Signal from sensor to dme
Pin 5 (pink) - 5v from dme
Pin 6 (black) - Ground
Driver side
Pin 2 (grey) - 12v
Pin 3 (yellow) - Signal from sensor to dme
Pin 4 (brown) - Signal from sensor to dme
Pin 5 (green) - 5v from dme
Pin 6 (black) - Ground
Last edited by A4RingedONE8T; 07-21-2011 at 01:54 PM.
|