Nissan 370Z Forum - View Single Post

JAKES Z · 07-06-2011, 02:14 PM

I did something similar using VHT with my tails, but masked the white part. They got dull like this after the two light layers of clear coat. I used dupli-color crystal clear acrylic enamel. What would be the best way to buff these to get a better shine on there? I was hoping the white part of my tails would keep the OEM look-- no haze, just perfectly clear.

This is before the clear coat:

This is the finished project:

Sorry if this is going a bit off the OP's original topic as he already suggested he wasn't looking for a gloss/shine look on this tails, but this is the closest thread I could find regarding this.

07-06-2011, 02:14 PM	#18 (permalink)
JAKES Z Base Member Join Date: Mar 2011 Location: Fresno, CA Posts: 16 Drives: 2016 AWD Rogue Rep Power: 14	I did something similar using VHT with my tails, but masked the white part. They got dull like this after the two light layers of clear coat. I used dupli-color crystal clear acrylic enamel. What would be the best way to buff these to get a better shine on there? I was hoping the white part of my tails would keep the OEM look-- no haze, just perfectly clear. This is before the clear coat: This is the finished project: Sorry if this is going a bit off the OP's original topic as he already suggested he wasn't looking for a gloss/shine look on this tails, but this is the closest thread I could find regarding this.