Quote:
Originally Posted by CFZ
You wont blow out a shock from high spring rates. Whether the shock is valved for really stiff springs or really soft springs, they use the same seals and shims. In fact stiffer springs would minimize shock movement, and soft springs would obviously increase it. In other words string rate does not affect the life of shocks.
But what does it bottoming out the shock. Swift has already figured out the useable stroke of the shocks for us when developing these springs. Im sure it wont be a problem.
|
You are kidding right. Why do you think Bilstein charges $60+ for each shock rebuild. They might use the same seals, but the actual amount of gas or oil and the size of orifice are completely differently. If you ever send your shock in for a rebuild, they would ask you everything from wheel/tire weight to spring rate and all the little stuff. When your spring rate goes up 20-30% harder/quicker over what the shocks are designed for, what do you think absorbs the impact along with the spring? The stiffer spring rate effects the compression and the rebound stroke as the shock has to work much harder/quicker to return the shock back to its original position. I have nothing against this particular spring, but it's a fact that you will likely decrease the useful life of the shock simply from doing stuff like that. It could be 1000 miles, it could be 75K miles. You just don't know, but you are shortening the life of this shock by doing it. It's just common sense, the spring is 20-30% stiffer than stock!!!
(STRAIGHT FROM BILSTEIN'S WEBSITE) Interaction between spring and damper
When a car passes over an obstacle, this first has an impact on the spring, which must not be hampered by excessive damping performance on the part of the shock absorber. When a car passes over a bump in the road, for example, the obstacle forces the wheel up into the wheel housing. In the process, the spring is compressed. The shock absorber is now in its compression stage. Once the spring has levelled out the obstacle, the shock absorber has to slow down the movement of the spring as it releases its tension with great force. The shock absorber is now in its rebound stage. Compression stage (compressing of the springs and the damper, e.g. when driving over bumps in the road) = usually approx. 25% of the damping force. Rebound stage (when the spring pulls the damper apart) = usually approx. 75% of the damping force.
Conclusion: A spring with a higher spring rate (sport or lowered spring) will only work at its best in conjunction with the appropriate high-performance or sports shock absorber.