I did a continuity test between the 3.5 MM pin and the wires on the other end of it...
but no luck...
so I have one end is the pin and the other end are 2 wires.. I tried a few combinations to do the continuity test but it failed...
Any suggestions on how I should a continuity test with 3 ends (2 wires on one end + the end where the 3.5 mm pin is..)
Can i get a mono 3.5 MM pin from radio shack and do some test with it.. then connect it to the S-more switch and then connect it to the back of the kenwood ?
something like :
2.5mm Mono Male to 3.5mm Stereo Female Adapter - Cables To Go
Thanks,
Jay