smokejr

I looked thru most of the oil cooler threads and did not find much info on the clearance
needed for the SS lines over the swaybar. I installed the 19-row Stillen oil cooler over
the weekend and routed the SS lines like the instructions say to over the swaybar and out
a hole that I cut. Question is how much clearance do you need between the SS lines/fittings
and the swaybar??
I have about 3/4inch of clearance and about 3/8inch clearance to the alternator, I called
Stillen and they said it should be ok, but if I was worried, then dis-connect swaybar ends
and move the bar up and down to see if it hits.
Well I did not like this advice and choose not to do it, so does anybody know if the swaybar
will move up and down enough to hit them?? do they move up and down much at all??
I installed the thermostatic plate version to.

thx for all help........
-Smokejr