Quote:
Originally Posted by Nikkolai
Please post as much pictures as you can because I am about to buy the parts and install the oil cooler via Modshack way. Open track days are coming up soon. I did not want to cut either and I thought about routing the lines next to the power steering cooler. No one else seemed to have done it that way so I am curious.
BTW, was it possible to mount just like Modshack did but flip the damper bar 180 degrees?
|
I mounted an angle bracket (1.5"x1"X8") at the top of the cooler and one bolt (in the center of the angle bracket) into thin horizontal air deflector near the top of the radator.
Next I made two 3"x1"x.25" brackets and bolted them to the plastic frame of the car. Last I placed two .5" spacers between the barackets and the cooler.
It ends up as a 3 point mount and very strong, 1/2" clearance from the damper.
As to the lines I attached the aft bolts of the belly-pan and held the lines in the PS line channel as I closed it up. You need to put some type of anti_chaff material on the hose. I am going put some clamps on it tomorrow. That way when I go the get the oil change I won't fall out.
The first hose I cut too long (4 inches) but it has oil on it now and I'll fix it at the next change.
Note: when you push the hose into the fitting USE LUBE and DON"T STOP!
I am deploying in 8 days so if I don't get the pics tomorrow I could be a long time before I do.
I did use all the modshack listed parts but with the 25 row cooler.