Quote:
Originally Posted by SAM@GTM
Where did get the price of 1500 for the harness, does that mean that racelogic box only cost 700 dollars per your statement and calculations.
FYI you could not wire the car in a day, wiring the abs sensors alone witch you will have to remove the abs unit to do is a 6 hour job .
It takes less then 3 mints to install our system.
Sam
|
I stated I could get the Race Logic box (with launch control) and analog controller for around $800 in Europe (probably closer to $1000 here). I mentioned this in my post. $2300-$800=$1500. I understand that you do not sell the harness for $1500, and there are other things you do for the $2300 price....
I am not necessarily trying to give you are hard time about the price. As I stated, there is definite appeal in what you are offering; mainly the 3 minute install you pointed out, and not having to hack up the factory wiring. Both of which are a big deal to some people. I think it is great that you are offering this as a PnP option. People just need to understand what they are getting, and that is about $1000 worth of hardware and a PnP harness. There is a misconception that other things are required beyond the control module and analog controller, and I don't think that is the case (your customer, that I am assuming has this, stated that speed sensors were needed).
The RaceLogic traction control system is a well proven setup for just about any type of race car. I have seen it used on all types of cars, and I think it's cool that you are offering a simple solution for us. If someone really races (drag or track), I think what you are offering is a good solution if they do not want to hack up their car. My comments about were not specifically about the Z. I was originally looking into it for a different car altogether. Sorry, I won't comment any further on it in this thread just to keep thing from going to far OT....