Quote:
Originally Posted by kenchan
I would do 0.05 to 0.10 degrees per side if I had wear in mind. Id go a bit more aggressive for my car tho.. 0.10 to 0.15 per side. I think the factory setting is pretty aggressive. At 4000 miles my factory tires were about half done. 
|
Quote:
Originally Posted by Red__Zed
I would stick with factory toe specs for the rear if you can. 
|
Hey guys thanks for the rear set up tip, probably go with toe in at 0.08 degrees to start with, it's at the far end of factory toe specs.
Am I ok with leaving the fronts at zero toe?