Originally Posted by ZForce

Hey kenchan, first off the ings look great!

Well I took the car to another alignment shop and got the toe dialed into zero on all four corners. The camber is not wild like before meaning the dealership's rachk was ouit of calibration. Took it on a run this last Sat thru the canyon and.....maybe I am not used to zero toe on all fours but it was squirming a bit in the rear and the fronts felt wierd hitting bumps in the curves. You had some concerns running zero in the rears. Should I try running some toe in on the rears? I am not the best describing what is what without any proper track driving instructions and schooling so I apologize up front if I am not sure what I am supposed to be looking for. I only had about 200 miles on these new RE-11's. Could it be the tires have not scrubbed in yet?

Here are my current specs.


New alignment as of 5/20/11

Fr Left -1.6
Fr Right -1.5
Toe Left 0.00
Toe Right 0.00
Total Toe 0.00
Steer Ahead xx.xx


Rr Left -1.3
Rr Right -1.2
Toe Left 0.00
Toe Right 0.00
Total Toe 0.00
Thrust Angle 0.00