Quote:
Originally Posted by bigaudiofanat
I like, however i would go with the ID Q over the lower end for a better overall sound.
|
I am kinda concerned about the airspace. From what I have found out, the space on my new box is about 1.3 cubic feet. Here are the specs on the IDQ
http://www.woofersetc.com/p-6224-idq...subwoofer.aspx
RE: .9/3.6 Ohms
FS: 26Hz
QES: .437
QMS: 2.806
QTS: .374
VAS: 3.0 cuft
Xmax: 18 mm
SD: 519.45 cm2
SPL: 87.22 dB
Recommended Enclosure Size (sealed box): 0.65-1.0 Cu.ft
Mounting Depth: 5.8"
Mounting Diameter: 11"
Power Handling: 50-750 Watts RMS
XMax: 17.0mm
Sealed ft3: 0.90
Ported ft3: 1.50
I am also trying to figure out if I should do 2 Ohm or 4 Ohm on the Subwoofer. And what would my best way of wiring the voice coils should be. Any Advice?
Again looking for best sound quality over teeth rattling bass.