Nissan 370Z Forum - View Single Post

HoneyBadger · 05-17-2011, 02:43 PM

I just bolted on my Megan exhaust and one of the pipes is banging on the crossmember at certain RPM's and during shifting. The Megan exhaust is a dual system and the other pipe sits up about 1/2 to 3/4 of an inch above the crossmember with no problems.

I tried taking the entire exhaust off and bolting it on again but got the same problem. I read some threads where folks were having similar problems with Stillen and fixed it by lowering the crossmember a bit with washers. I guess the other option would be to someone raise the hangers up a bit.

Any thoughts or suggestions would be appreciated.

HB

05-17-2011, 02:43 PM	#1 (permalink)
HoneyBadger Base Member Join Date: Apr 2011 Location: Knoxville, TN Posts: 67 Drives: 2010 PG 370z Rep Power: 14	Exhaust banging on crossmember I just bolted on my Megan exhaust and one of the pipes is banging on the crossmember at certain RPM's and during shifting. The Megan exhaust is a dual system and the other pipe sits up about 1/2 to 3/4 of an inch above the crossmember with no problems. I tried taking the entire exhaust off and bolting it on again but got the same problem. I read some threads where folks were having similar problems with Stillen and fixed it by lowering the crossmember a bit with washers. I guess the other option would be to someone raise the hangers up a bit. Any thoughts or suggestions would be appreciated. HB __________________ HoneyBadger don't care.