Quote:
Originally Posted by flashburn
Is it possible that my rotors are warped and it isn't from deposits? I looked them over and didn't see anything, but if it's subtle, I doubt I would of.
edit: I meant that I looked them over for any warp-age.
|
You can't tell the warpage by eye, you need to measure the runout with a dial gauge to see what the variation is as the rotor turns. Runout of a few thousands of an inch will cause vibration.
I had the same problem as Mike with the Ferodo 2500's overheating and leaving deposits on the rotors, my front pads were destroyed in about 3-4 sessions. I used a different pad to try and clean it up which worked a partially but not completely.