Not bad, I take it your are NOT running any camber arms with toe bolt in the rear, nor upper control arms in the front?
The front right is way out of spec at -1.9 (when OEM is -1.4). I would have had the left front a bit closer to the right if that is all you could muster out of the camber. Not bad, I am hoping for a more on the max side for the fronts to be at -1.4. It may not be obtainable without upper control arms. If that is the case then you can figure more tire wear running at anything greater than -1.4. My fingers are crossed, that I can muster more out of the fronts. I am not worried at all on the rears since I have rear camber arms and toe bolts.
Quote:
Originally Posted by Tauruszguy
Had my alignment done today after the springs settled. I am running H&R spacers 15mm/20mm as well. Here are the results... feel free to chime in!  |