Nissan 370Z Forum - View Single Post - DIY: Rear Fog Light Wire Via BCM and Stock Wiring

spearfish25 · 04-27-2011, 08:05 AM

I've never seen the Evo-r. My guess is the stock harness you plugged into it is actually wired to the flasher circuit in the Evo-r and not the constant light circuit. You could try cutting off the factory harness connector and wiring the Evo-r connector to the end of the factory harness. Hopefully Evo-r packaged a wiring diagram so you'll know which circuit is the constant on.

If you wanted reverse flashing, you'd splice into the reverse lights and run the wires to the second circuit in the Evo-r.

04-27-2011, 08:05 AM	#24 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	I've never seen the Evo-r. My guess is the stock harness you plugged into it is actually wired to the flasher circuit in the Evo-r and not the constant light circuit. You could try cutting off the factory harness connector and wiring the Evo-r connector to the end of the factory harness. Hopefully Evo-r packaged a wiring diagram so you'll know which circuit is the constant on. If you wanted reverse flashing, you'd splice into the reverse lights and run the wires to the second circuit in the Evo-r. __________________ 2013 Cadillac V-Wagon, RIP Z Last edited by spearfish25; 04-27-2011 at 08:08 AM.