Quote:
Originally Posted by Javier
Hi. I'm thinking of doing the same to my headlights but my numbers indicate that I should be using 200 OHM resistors at 1 watt. The LEDs are runnung at 26mA not the 20mA that they are designed for so the current draws .762 watts. Therefore you should us at least a 1 watt resistor not 1/4 or 1/2. My numbers are as follows: 12 v devided .060mA (3 leds in series) = 200 ohms. Please let me know what you think. I just do not want to be opening these headlights once a year. The way I see it the current is greater than the resistor can handle and they may burn up.
|
I have the OPs car and lights. Three if the LEDs started flickering on one light. I have since disconnected the LEDs. Way too much headache. Not sure if this helps but more so a warning that you could be right ....or maybe something got loose.
Personal taste but I like it better without the flashy LEDs. I must be getting old.