Quote:
Originally Posted by Juruki
Did anyone with a 09 succesfully install their cameras to their OEM NAV screen?
My shop tried installing it this past weekend and they couldnt get it to work...
|
okay, finally installed Navtool unit & kenwood cmos 200 camera. Navtool unit is working red power light is on but when in reverse no backup camera image??
Followed all wiring connection & double checked(multimetered for voltage)...purple "reverse" wire from cmos 200 tapped into orange reverse light, ACC red wire tapped into push start ignition & grounded black wire, all these 3 wires connected to power supply box side labeled 'camera'.
Cmos 200 video cord of camera connection cord plugged into video 2 of Navtool unit with one end to power supply box & other end to camera itself.
Navtool; video 2 used, DC12V jack- black w/ white stripes to 12v acc. power & black wire grounded, RGBS position, green & 2 white wires grounded, blue wire to reverse light wire, connected plug & play Navtool harness to navtool unit & oem nav system.
Question?- does the oem nav system needs to be switched to backup camera setting?, if so I couldn't find such a setting on the screen.