Nissan 370Z Forum - View Single Post

FromG2Z · 04-12-2011, 02:47 PM

Been reading this:

DIY: Stock Catback Exhaust Removal

Guys... have a question on this DIY. As I prepare to do this on my own this weekend.

1) The black rubber brackets that support the muffler and mid sections have to be slid off the existing muffler hangars, correct? Hence the reason for some "lube".... so they have to be reused for any new muffler to be installed?

2) So does that mean the hangars on ANY aftermarket muffler (I ordered Invidia Gemini) must be located in the same relative location as the existing muffler so as to use the existing mounting holes on the car frame?

3) This was stated in Step 7: The Y-Pipe has no such supports so simply remove the 4 bolts loosened before in Step 2 and it should come right off like thisThen what are the 2 black plastic looking pieces on either side of the Y pipe? Are those O2 sensors? Nothing was stated in the DIY for removing anything other than the bolts holding the Y pipe to the cat...

please clarify the above 3 points... thanks!

04-12-2011, 02:47 PM	#1 (permalink)
FromG2Z A True Z Fanatic Join Date: Nov 2010 Location: Fields of Opportunities Posts: 1,406 Drives: '12 5.0, kona, 6MT Rep Power: 18	OEM exhaust removal clarification Been reading this: DIY: Stock Catback Exhaust Removal Guys... have a question on this DIY. As I prepare to do this on my own this weekend. 1) The black rubber brackets that support the muffler and mid sections have to be slid off the existing muffler hangars, correct? Hence the reason for some "lube".... so they have to be reused for any new muffler to be installed? 2) So does that mean the hangars on ANY aftermarket muffler (I ordered Invidia Gemini) must be located in the same relative location as the existing muffler so as to use the existing mounting holes on the car frame? 3) This was stated in Step 7: The Y-Pipe has no such supports so simply remove the 4 bolts loosened before in Step 2 and it should come right off like thisThen what are the 2 black plastic looking pieces on either side of the Y pipe? Are those O2 sensors? Nothing was stated in the DIY for removing anything other than the bolts holding the Y pipe to the cat... please clarify the above 3 points... thanks! __________________ 2012 5.0 GT Prem, Kona Blue, 6MT, HID, Brembo, 3.73 -- Ordered: 9/20/11, Born on: 10/20/11, Delivered 11/15/11"Marilyn" GT500 mufflers/flaps, MGW shifter, FRPP K springs, BMR panhard bar, Boss coil covers, 3DC spoiler, Llumar Tint (35% and 20%), 3M ClearBra