JGreenwood07

I was working on the 370 and noticed something on the rocker panels. It looks like there is the slightest deformation on each rocker panel towards the front of the car, almost under where the Z turn signal is. The best way to put it is that it looks like a very slight undulation in the panel surface. Can only really be seen by getting down on the ground and looking down along the sides of the rocker panels. It sounds similar to the issue people were having with regards to the front bumper and the way the plastic would undulate in certain spots.

I'm not sure if this is from mounting points on the rocker panels pulling the plastic a bit, or a botched job of putting the car up on a lift, but was curious to see if anyone notices the same thing on their car.

It's on each rocker panel in the same spot, so I'm leaning towards it just being a factory thing but wanted to check with anyone else to get their opinion. There is no damage to the paint where the indentations are. I did just have springs installed, but noticed this issue beforehand.

Thanks.

edit: attached some images of the area in question. You can't see the spot in the images, but wanted to include them for reference.

Attached Images

	1.jpg (416.9 KB, 138 views)
	2.jpg (423.5 KB, 131 views)