Quote:
Originally Posted by 37Z
The tweeters (focal K2P) already have a wire connection. Is it best to rewire the tweeters (if possible) if I locate the crossovers in the hatch area? I guessing 14 gauge is sufficient.
|
Trying to resolder the tweeter is a bad idea, the wire attached from the factory is sufficient for it's length. Like 90 said just extend from the factory wire end there on your new 14gauge and that will do fine. You should solder the woofer connection unless there is a set screw, you don't want the wires coming loose when closing your doors several hundred of times. Soldering may seem like an easy process but it's not always straight forward, if your not experienced with it do some youtubing first to see what a good solder joint and a cold solder joint looks like. It can really kill your install if not done correctly.