Quote:
Originally Posted by 90 ST
the stock non bose may just have a little cap on the tweeter, the wires will then end up running off of the mid, which is hooked up to the deck., best thing is to just run new wire to all of the speakers ect.
As for the best connection, solder if you can, some of the high end speakers will have set screws on the mid, so it depends on the speaker too.
|
The tweeters (focal K2P) already have a wire connection. Is it best to rewire the tweeters (if possible) if I locate the crossovers in the hatch area? I guessing 14 gauge is sufficient.