View Single Post
Old 03-25-2011, 07:46 AM   #9 (permalink)
lazer_Z
Premium Member
 
lazer_Z's Avatar
 
Join Date: Nov 2010
Location: baton rouge, la
Posts: 164
Drives: s2000
Rep Power: 15
lazer_Z is on a distinguished road
Default

Quote:
Originally Posted by Mike View Post
I guess I would want hose, and a mounting point in the wheel well, since I have a stillen bumper.
I could make something for the stillen bumper as well, but dont know anyone around here with one. you could send me yours

Quote:
Originally Posted by djpathfinder
I can't see hoses adding a lot to the cost of a brake cooling kit.
actually thats one of the more expensive parts of the kit.

Quote:
Originally Posted by spearfish25
I think I speak for everyone when I say the challenges are 1) finding the proper flanges to mount on the fangs and particularly the rotors/calipers and 2) routing the hoses. Buying hoses is the simple part
yes those are the more difficult parts of making this kit. I will be vacuum forming the front ducts this weekend hopefully (already have the design sketched out) and as far as how it mounts up to the rotor/calipers isnt too difficult either. depending on rain (dont have a garage) I will be test fitting those fittings as well this weekend.

once i get a few things actually made, and not just my sketches, I will throw up some pictures.

Actually if am performance has pics of their brake set up on the site how I am cooling the rotors is very similar to that. It is how we did it on some other road race cars that I have been a part of in the past.
__________________
lazer_Z is offline   Reply With Quote